Fujifilm X-Pro2 Manual

To record raw, unprocessed data from the camera image sensor, select a RAW option for image quality 
in the shooting menu as described below.  JPEG copies of RAW images can be created using 

C PLAY 

BACK MENU > RAW CONVERSION, or RAW images can be viewed on a computer using the RAW FILE 
CONVERTER application (

P 81, 123).

 Press MENU/OK in shooting mode to display the shooting menu.  Select the 

H IMAGE QUALITY 

SETTING tab (

P 87), then highlight IMAGE QUALITY (P 88) and press MENU/OK.

 Highlight an option and press MENU/OK.  Select RAW to record only RAW images, or FINE+RAW or 

NORMAL+RAW to record both JPEG copy together with the RAW images.  FINE+RAW uses lower 
JPEG compression ratios for higher-quality JPEG images, while NORMAL+RAW uses higher JPEG 
compression ratios to increase the number of images that can be stored.

To toggle RAW image quality on or off  for a single shot, assign RAW to a function button (

P 51).  If a JPEG option 

is currently selected for image quality, pressing the button temporarily selects the equivalent JPEG+RAW option.  
If a JPEG+RAW option is currently selected, pressing the button temporarily selects the equivalent JPEG option, 
while if RAW is selected, pressing the button temporarily selects FINE.  Taking a picture or pressing the button 
again restores the previous setting.