Samsung SWT50B3 Manual Do Utilizador

Página de 7
Remove the cap-hose 
from the drain hose.
In the case of pump drained 
washer, remove 
the cap-hose from 
the drain hole.
Don't use excessively hot water.
(50˚C or more)
Plastic parts may be deformed or damaged.
Also, clothing may be deformed or decolored.
Before washing,check all pockets.
If nails or pins remain in pockets,they may
damage the washer or clothes.
Close the water tap a little if the 
water pressure is too high.
Never splash water on the control panel.
Be sure to cover with the inner
cover on laundry before spinning.
This prevents laundry from
being tossed out and damaged.
To avoid water splashes, close the 
wash tub lid.
Be sure laythe drain hose down.
(in case no drain pump)
Be sure that the washer is grounded.
To avoid electrical shock,use a 
metal pipe for the ground
connection. But, don't ground the
washer with gas pipes or telephone 
lines to avoid to dangers of explosion 
or lightning strike.
Do not put your hands into the 
spin dryer basket when it is 
spinning.
Your fingers can be caught by 
spinning laundry and damaged.
Never allow children to operate 
or play with the washer.
Children playing with the
washer may accidentally
fall into the washing tub. 
Disconnect the power cord from the 
power supply when not in use. 
Ventilation opening must not be obstructed 
by carpeting when the washing machine is
installed on a carpeted floor.
If the supply cord of this appliance is 
damaged, it  must only be replaced by a repair 
shopappointed by the manufacturer, because 
special purpose tools are required.
Warning to avoid overfilling and damages this 
appliance must be filled with the operator 
present using a moderate water supply 
pressure only.
Do not store or use gasoline or other flammable 
vapors and liquids in the vicinity of this or any
other appliance.
To avoid overfilling and damages this appliance
must be filled with the operator present using a
moderate water supply pressure only.
1.
WASH TIMMER
This is used to set the 
wash time, 1-15 minutes.
2.
CYCLE SELECTOR
This is used to set the 
Washing/Rinsing 
or Draining.
3.
SPIN DRY TIMER
This is used to set the 
spin time, 1-5 minutes.
4.
WATER SELECTOR(FOR SW-50B1)
During washing, WATER SELECTOR 
KNOB should be selected. 
During spin rinsing, WATER 
SELECTOR KNOB should 
be selected.
CONTROL PANEL
Wash/Rinse
Drain Rinse
CYCLE SELECTOR
Wash
Drain
CYCLE SELECTOR
0
3
1
4
2
5
SPIN DRY TIMER
0
9
3
12
6
15
WASH TIMER
WATER SELECTOR
Wash
Spin
BEFORE USING THE WASHING  MACHINE CAUTIONS
PRECAUTIONS WHEN OPERATING 
1