Samsung HMX-S10BP Manual Do Utilizador
112
wireless network connection
and configuration
(HMX-S15/S16 only)
AUTO CONNECTING TO A NETWORK
You can connect to the network using an AP (access point) in the wireless network service area.
PRECHECK!
Select the record (
/
) mode by pressing the MODE button.
page 27
1. Touch the Network (
) tab
“Settings” “Access Point Setting.”
The camcorder will automatically scan for APs available in the network.
To reload the AP device list, touch the Refresh (
To reload the AP device list, touch the Refresh (
) tab.
2. Touch the desired AP.
The camcorder will be connected to the network if using an unsecured
AP.
If you select a WPS AP, touch the WPS PBC tab on the bottom of the
LCD screen, and then press the WPS button on the AP device or router
within 2 minutes, which will be activated on the screen.
If selecting a secure AP, touch the (
AP.
If you select a WPS AP, touch the WPS PBC tab on the bottom of the
LCD screen, and then press the WPS button on the AP device or router
within 2 minutes, which will be activated on the screen.
If selecting a secure AP, touch the (
) tab and proceed to the next step.
3.
Configure the network settings.
4. Touch the (
OK
) tab.
The camcorder will connect to the network via the selected AP.
You can check the signal strength in the top right corner of the screen.
You can check the signal strength in the top right corner of the screen.
•
•
•
•
•
•
•
•
•
WPS
WPS(WiFi Protected Setup) AP
The camcorder will automatically connect to the wireless
network with safety and ease.
The camcorder will automatically connect to the wireless
network with safety and ease.
Secured AP
It will connect to the wireless network using the assigned
password and IP setting.
It will connect to the wireless network using the assigned
password and IP setting.
Ad-hoc AP
It will connect to the network using a mobile terminal that
supports wireless communication.
It will connect to the network using a mobile terminal that
supports wireless communication.
Signal strength
Displays the strength of the wireless signal from the AP device.
Displays the strength of the wireless signal from the AP device.
OFF
OFF
Not connected
Very weak
Weak
Normal
Very strong
Signal Strength
AP Information
Submenu items
Authentication: Select an authentication type according to your AP setting.
(Open, Shared, WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK)
when Open or Shared is selected, WPA is automatically set.
when Open or Shared is selected, WPA is automatically set.
Data Encryption: Select an encryption type according to your AP setting.
(Disabled, WEP, TKIP, AES, TKIP/AES Mixed)
Network Key: Enter the password and touch the (
OK
) tab. For typing in characters, refer
to page 115.
IP Setting: The default is Auto. For manual setting of the IP, refer to page 114.
•
•
•
•
/FUXPSL4FUUJOH
.*/
OFF
OFF
"DDFTT1PJOU4FUUJOH
%FWJDF*OGPSNBUJPO
"DDFTT1PJOU4FUUJOH
.*/
4BNTVOH0VUEPPS
4BNTVOH"#$
-JOLTZT
WPS PBC
WPS
OFF
OFF
45#:
<.JO>
.*/
NOR
NOR
8JSFMFTT/FUXPSLJOH
.*/
OFF
OFF
1MBZUP57
#BDLVQUP1$
4IBSF
4FUUJOHT