Samsung HMX-S10BP Manual Do Utilizador

To charge the battery with the AC power adaptor

The battery is not charged during the power saving mode, which may keep the mode indicator on or 
flashing. Start charging the battery after turning off the camcorder by pressing the Power (

) button.

We recommend you charge the battery pack in a place with ambient temperature of 10°C ~ 30°C (50˚F~86˚F).
When charging, if both the USB cable and AC power adaptor are connected, the AC power adaptor will 
override the USB.
The camcorder does not operate with USB power only. Use the power adaptor or battery to operate the 
camcorder. 
Charging time may depend on a type of the USB host (PC).

•

•
•

•

•

1.  Press the Power (

) button to turn off 

the camcorder. 

page 25

2.  Open the jack cover and connect the AC 

power adaptor to the DC IN jack.

3.  Connect the AC power adaptor to a wall 

socket.

The charging (CHG) indicator lights up 
and charging starts. After the battery 
is fully charged, the charging (CHG) 
indicator turns green.

•

Please make sure that there are no foreign substances in the plug and socket when you connect the AC 
power supply to the camcorder.
Charging the battery at low temperature may take longer or fail to fully charge (green indicator will not turn on).

•

•

You can charge the battery using the AC power adaptor or USB cable.

Before starting the following procedure, make sure that the battery is attached in your camcorder.

To charge the battery with the USB cable

1.  Press the Power (

) button to turn off 

the camcorder. 

page 25

2.  Open the jack cover.

3.  Connect the included USB cable to the 

USB jack on the camcorder and to a USB 
jack on a running PC.

The charging (CHG) indicator lights up 
and charging starts. After the battery 
is fully charged, the charging (CHG) 
indicator turns green.

•