American Audio MCD-110 Manual Do Utilizador
1. Checking the Contents
Be sure your MCD-110™ package was shipped with the following:
1) MCD-110™ Professional Rackmount Single CD Player
2) User Manual (this booklet)
3) Stereo Pair of RCA Cables
4) Warranty Card
2. Installing the Units
3) Stereo Pair of RCA Cables
4) Warranty Card
2. Installing the Units
1) The MCD-110 is designed to placed on a flat level surface or installed into a standard 19”
rack mount case or enclosure. When mounting the MCD-110 in a 19” rack be sure to sup-
port the unit by all four screw slots on the face of the unit.
2) Be sure the player is mounted in a well ventilated area where it will not be exposed to direct
sunlight, high temperatures, or high humidity.
3) Try to place the unit as far as possible from TV’s and tuners, as the unit may cause undesir-
able interference with such devices.
3. Connections
1) Be sure the power is disconnected.
2) Connect the included RCA cable from your MCD-110™ outputs to the inputs on your mixer.
3) Use the Digital Output to connect to MiniDisc, DAT machines, or other device that accepts
digital inputs.
CAUTION:
To avoid sever damage to the unit, be sure the power is off when making connections to the unit.
To avoid sever damage to the unit, be sure the power is off when making connections to the unit.
SET-UP
CAUTION:
• The player will work normally when the main unit is mounted with the front panel within 15
degrees of the vertical plane If the unit is tilted excessively, disks may not be loaded or unloaded
properly. (Figure 1)
• The player will work normally when the main unit is mounted with the front panel within 15
degrees of the vertical plane If the unit is tilted excessively, disks may not be loaded or unloaded
properly. (Figure 1)
Figure 1
©
American Audio
®
- www.americanaudio.com - MCD-110™ Instruction Manual Page 7