Sony PCS-TL33 Manual Do Utilizador

112

On Screen Messages

  

A

ppen

dix

The remote party is unable to connect.

Check the remote party’s settings.

Cannot connect because the line is busy.

Cannot connect because the remote party’s line is busy.

The connection was canceled by the remote 
party.

Cannot connect because the remote party cancelled a call to the local site.

Connection failed.

Check the communication settings.

4xx response received.

Cannot connect due to reasons such as the remote party using media not 
supported by the unit.

5xx response received.

Cannot connect due to reasons such as a server error. Check the SIP server.

The connection was canceled by the remote 
party.

Cannot connect because the call was rejected by the remote party.

6xx response received.

Cannot connect due to reasons such as the remote party not being found. Confirm 
the remote party’s number and settings.

Cannot connect using IPELA VC Link under 
the current settings.

Check the IPELA VC Link settings.

Cannot connect using SIP under the current 
settings.

Check the SIP settings.

Router is not supported. (No M-SEARCH 
response)

Make sure that you are using a router that is supported and that the router settings 
are correct.

Router is not supported. (Service 
unavailable)

Make sure that you are using a router that is supported and that the router settings 
are correct.

Router is not supported. (Failed to obtain 
WAN IP address)

Make sure that you are using a router that is supported and that the router settings 
are correct.

Router is not supported. (Port mapping 
failed)

Make sure that you are using a router that is supported and that the router settings 
are correct.

Cannot communicate through SIP. (Port 
mapping failed)

Make sure that you are using a router that is supported and that the router settings 
are correct.

There are no open ports. Confirm the 
router’s port settings.

Make sure that you are using a router that is supported and that the router settings 
are correct.

Failing to automatically configure NAT 
settings.

Make sure that you are using a router that is supported and that the router settings 
are correct. 

Cannot execute the Function Extension 
Command because the setting for use of 
the SIP server is enabled.

When using IPELA VC Link, make sure to disable the SIP server setting.

Rejected by server.

The call was disconnected by the remote party.

Authentication error.

Check the ID and password.

Cannot connect. Please try again later.

Try calling again later.

Router is not supported. (Port mapping 
delete failed)

Make sure that you are using a router that is supported and that the router settings 
are correct. 

Unable to communicate. (Port mapping 
failed)

Make sure that you are using a router that is supported and that the router settings 
are correct. 

Communication with UPnP is not available. 
(Timeout)

Make sure that you are using a router that is supported and that the router settings 
are correct. 

Communication with UPnP is not available. 
(Busy)

Make sure that you are using a router that is supported and that the router settings 
are correct. 

Communication with UPnP is not available. 
(Internal error)

Make sure that you are using a router that is supported and that the router settings 
are correct. 

Connection with the selected line interface 
is not available in the current 
communication mode.

Check the current communication mode.

Disconnected because reception of packets 
from the far-end side has stopped.

Packets were not received properly.