Panasonic cq-hx2083u Manual Do Utilizador

51

50

You can adjust the bass and treble sound.

Default:  BAS (Bass) 0 dB 

TRE (Treble) 0 dB

Setting range: j12 dB to i12 dB (by 2 dB)

You can adjust the sound balance among
the front, rear, right and left speakers.

Default: BAL (Balance) CNT (Center)

FAD (Fader) CNT (Center)

Setting range: 15 levels each

You can change the subwoofer volume level.
Default: 0 dB
Setting range: j

∞ (subwoofer mute),

j6 dB to i6 dB (by 2 dB)

Select the upper limit frequency of the
sound from subwoofer.
Default: 120 Hz
Setting range: 120 Hz/80 Hz

With music genres like rock music, the
bass-sound will be more powerful.

Default: S·HDB OFF
Setting range: S·HDB OFF, TIGHT, BOOM

2

1

#

#

          [   ]

In the case of remote control, as an alternative to
performing operations from the menu, the opera-
tions can be performed directly using the buttons
shown below.

1

2

3

2

3

1

Press.

Press.

(Example: S.HDB)

(Example: BOOM)

Press.

Press.

For details on how to perform menu operations
using the remote control, refer to page 28.

Note:
≥ Press  [MENU]  or [DISP] (display) on the remote

control to return to the regular mode.

≥ Press

/[RET] (RETURN) to return to the pre-

vious display.

: The bass sounds of

the speakers are
strongly emphasized.

: The bass sounds of

the speakers are mod-
erately emphasized.

: S·HDB is non-active.

: Enhanced

: Decrease

: Front enhanced

: Rear enhanced

: Right enhanced

: Left enhanced

: Up

: Down

: No more than 80 Hz

: No more than 120 Hz

Subwoofer level

Subwoofer frequency

The following transition will be made by each [

]

pressing.

Bass/Treble setting display

Balance/Fader setting display

Sub-woofer setting display

The following transition will be made by each [

]

pressing and holding for more than 2 seconds.
(page 33)

Note:
≥ The same operations as the [

] operations de-

scribed above can also be performed using
on the main unit.

BOOM indicator
lights.

TIGHT indicator
lights.