Yamaha dvd-s540 Manual Do Utilizador

16

In this menu, you can set up the digital audio 
output signal from the digital jacks, such as coaxial 
etc.

Press 34 to highlight Digital Output.

Enter its submenu by pressing 2.

Press 34 to highlight the selected item.
➜  All: Original digital signals output. In this mode, 
all audio settings except MUTE are invalid.
➜  PCM Only: If your receiver is PCM-
compatible, or your receiver can not decode 
MPEG-2, Dolby Digital, or DTS audio, choose this 
option.

Press ENTER/OK.

Press 1 and return to the Audio Setup Page.

In this menu, you can select PCM digital output 
between 48kHz and 96kHz.

Press 34 to highlight the LPCM Output.

Enter its submenu by pressing 2.

Move the cursor by pressing 34 to highlight the 
selected item.
➜  48K: 96kHz (if available on disc) PCM data 
stream will be converted to 48kHz.
➜  96K: If the 96kHz disc is copy protected, the 
disital output will be muted to comply with the 
standards.

Press ENTER/OK.

Press 1 to return to the Audio Setup Page.

The “Equalizer” allow you to select from various 
preset modes that control the frequency bands of 
sound to optimize certain musical styles.
It greatly enhances the excitement and enjoyment
of your favourite music.

Press 34 to highlight the “Equalizer”.

Enter its submenu “Sound Mode” by pressing 2.

Press 2.

Move the cursor by pressing 34 to highlight the 
selected item.
➜  None: Playback the disc under the original 
sound effect.

Press ENTER/OK.

Press 1 to return to the Audio Setup Page.

The “3D” can simulate the echoes and
frequency response of some particular places so 
as to make you feel like personally on the place.

Press 34 to highlight the “3D”.

Enter its submenu “Reverb Mode” by pressing 2.

Press 2.

Move the cursor by pressing 34 to highlight the 
selected item.
➜  Off: Playback the disc under the original sound 
effect.

Press ENTER/OK.

Press 1 to return to the Audio Setup Page.