Philips showview dvdr612 Manual Do Utilizador

54

3139 246 13454

1

Switch on the TV set.  Select the correct
Video In channel at the TV.

2

Press SYSTEM-MENU on the remote
control.

➜

The system menu appears on TV.

3

Press 4 to select { Preferences }.

4

Press 2 repeatedly to select one of the
options from { Preferences } and press 4
to select a setting you want to adjust.

➜

Instructions for adjusting the settings

are provided in the following pages.

5

Press 2 to enter its options and use

1

 2 3 4 to make your selection.

➜

If the selection in the menu is greyed

out, that means the feature is not
available or not possible to change at the
current state.

6

Press 1 to confirm.

7

To exit, press SYSTEM-MENU.

For more information on this menu,
please see pages 36~38 “Recording
settings”.

{ Sound mode }
You can select from the following settings
how sound will be played back by devices
connected to the analogue outputs (L/R
AUDIO OUT).

– { Stereo } : To hear sound from the left and

right audio channels. Use this setting when
the DVD recorder is connected to a stereo
TV.

– { Surround } : For audio device that is

compatible with Dolby Surround.  Dolby
Digital and MPEG-2 multi-channel are
mixed to a Dolby Surround-compatible
two-channel output signal.

{ Night mode }
Allows you to optimise the sound
dynamics at low volume.  This causes less
disturbance in quiet environments.  This
setting only functions with Dolby Digital
Audio on DVDs.

– { On } : Select this to level out the volume.

High volume outputs will be softened and
low volume outputs are brought upward to
an audible level.

– { Off } : Select this when you want to enjoy

the surround sound with its full dynamic
range.

Underlined option is the factory default setting.
Press 1 to go back to previous menu item.  Press SYSTEM-MENU to exit the menu.

1DVDR6xx_Eng00_13454c

9/28/04, 1:26 PM

54