honda-automobiles 2009 cr-v Manual Do Utilizador
−
If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.
vehicle, have an assistant start
that vehicle and run it at a fast idle.
Start your vehicle. If the starter
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.
Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.
Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short.
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short.
Connect the second jumper cable
to the negative (
to the negative (
) terminal on
the booster battery. Connect the
other end to the stud bolt on the
engine side as shown. Do not
connect this jumper cable to any
other part of the engine.
other end to the stud bolt on the
engine side as shown. Do not
connect this jumper cable to any
other part of the engine.
6.
7.
5.
4.
Jump Starting
T
a
k
ing
Ca
re
Ca
re
of
th
th
e
U
ne
x
x
p
e
c
te
d
321
０８／０７／２２ １８：２６：５２ ３１ＳＷＡ６２０ ０３２６
2009 CR- V
Table Of Contents
Main Menu