honda-automobiles 2010 fit Manual Do Utilizador
72
Navigation System
Information Features
Done
Once you have finished entering the
schedule, say or select
schedule, say or select
Done
. The
Calendar
screen is redisplayed and a
message icon appears.
NOTE:
• Only one entry can be stored for each
• Only one entry can be stored for each
calendar day.
• A maximum of 50 entries can be
stored in the schedule.
• To reactivate a previous message,
turn the Reminder setting from
Off
to
On
. If it is not turned on, the
reminder will not be displayed when
you start the vehicle.
you start the vehicle.
• The system displays active calendar
entries only after you answer
OK
on
the
Disclaimer
screen.
• For more information, refer to
System Start-up on page
Calculator
When you say or select
Calculator
, the
display changes to:
Use the touch screen to use the
following features:
following features:
Calculator
The calculator function operates like a
standard handheld calculator.
The calculator function operates like a
standard handheld calculator.
Unit Conversion
Values entered on the calculator can be
converted from one unit to another (e.g.,
inches to millimeters).
Values entered on the calculator can be
converted from one unit to another (e.g.,
inches to millimeters).
Unit Conversion
To perform a conversion:
1. Enter a numeric value to be converted
1. Enter a numeric value to be converted
(for example, 100).
2. Select the type of unit you want to
convert (for example, weight). The
screen for that conversion type
appears (see illustration in step 3).
screen for that conversion type
appears (see illustration in step 3).
3. Select the base unit (e.g., pounds) that
you wish to convert to some other
unit. All other units will change
automatically depending on the base
unit value. In the example below,
100 lbs converts to 1600 ounces, 0.05
ton (U.S.), etc.
unit. All other units will change
automatically depending on the base
unit value. In the example below,
100 lbs converts to 1600 ounces, 0.05
ton (U.S.), etc.
NOTE:
• If you do not enter a value to be
• If you do not enter a value to be
converted, only “Temperature” units
are selectable.
• Conversions using negative value
may produce meaningless or
physically impossible values.
2010 Fit