Lexmark 4227 Manual Do Utilizador
97
Chapter 5: Printer Options
P
rinter Options
Installing the Tractor 2 Feeder
The Tractor 2 Feeder is easy to install. No special tools or training
are needed.
are needed.
Note: Before installing the Tractor 2 Feeder, make sure contin-
uous forms are loaded on the other tractor feeder.
(When
Tractor 2 is installed, you must remove it from the printer to
load continuous forms on the other tractor feeder.) For help
loading continuous forms on the other tractor feeder, see
“To load continuous forms:” on page 70.
load continuous forms on the other tractor feeder.) For help
loading continuous forms on the other tractor feeder, see
“To load continuous forms:” on page 70.
1
Make sure the printer is Off.
2
Open, pull up, and remove the front cover.
3
If necessary, push the paper select lever down to the continu-
ous forms
ous forms
position.
4
Remove all tape from the Tractor 2 Feeder including the tape
that holds the Tractor 2 Feeder cable to the Tractor 2 Feeder.
that holds the Tractor 2 Feeder cable to the Tractor 2 Feeder.
5
Grasp the Tractor 2 Feeder using the right and left side panels.