Lexmark 4227 Manual Do Utilizador

Chapter 6: Solving Printer Problems

Ready (IBM)

The printer is online and ready to accept data, and IBM PPDS 
mode is selected.

Ready (EPSON)

The printer is online and ready to accept data, and Epson 
emulation mode is selected.

001 Paper Empty/
Add Paper

The printer is out of paper or the paper is not loaded 
properly. Load paper in the printer. For help, see “Selecting 
and Loading Paper” on page 55.

002 Paper Jam
Remove Paper

Clear paper jam. Remove any debris from inside the printer.

005 Cover Open
Close Cover

Top Cover is open or not properly closed. Close the top 
cover.

007 Data Error

Data transmission error in Serial Interface. Check the serial 
settings on the function menu to make sure they are correct. 
Check that the serial cable is properly connected at both ends.

00D I/F Error

Interface mode switch was changed after the printer was 
turned on. Return the printer to the appropriate interface 
mode (RS-232 or RS-422).

6XX Machine Chk

A Hardware error occurred. If this happens, turn off the 
printer, fix the paper jam or other problem, then turn the 
printer back on. If the error occurs again, contact your point 
of purchase, or see the printer registration card for the 
number appropriate for your country.

FastDraft

FastDraft font is selected.

Draft

Draft font is selected.

Gothic

Gothic font is selected.