Lexmark 4227 Manual Do Utilizador
35
Chapter 3: Using the Operator Panel
Using the Operator Panel
Using the Function Menus
This section describes the function menus and how to set them. To set
functions:
functions:
1
Press Start/Stop.
2
Press Menu to enter the function menu.
3
Press Item
↓
or Item
↑
until the function menu you want appears on
the display.
Note:
The selectable function menu is different depending on the
selected data stream mode (IBM PPDS or Epson emulation)
and the Interface mode (Parallel, RS-232 or RS-422).
selected data stream mode (IBM PPDS or Epson emulation)
and the Interface mode (Parallel, RS-232 or RS-422).
4
Press Next
to enter that menu item.
5
Press Item
↓
or Item
↑
until the value you want appears on the
display.
6
Press Store to save the selected value.
Note:
The currently selected default value is displayed with an
asterisk (
asterisk (
∗)
.
If you have to change the optional value in another function menu,
repeat steps 3 through 5. Otherwise, go to the next step.
repeat steps 3 through 5. Otherwise, go to the next step.
7
To print the function setting, press Item
↓
or Item
↑
until the Print
Settings message appears on the display.
8
Press Start/Stop to print the current setting values.
9
Press Quit to exit the function menus.
Note:
If you have changed any settings, the printer performs a
Power-On Self Test. If you did not change any settings, the
printer enters the not-ready state.
Power-On Self Test. If you did not change any settings, the
printer enters the not-ready state.