Lexmark 4227 Manual Do Utilizador

Chapter 4: Selecting and Loading Paper

When Auto Tear-Off is off, press Tear Off/Store to manually move 
the continuous form paper to the tear-off position.

When your print job has finished, press Tear Off.

The continuous form moves to the tear-off position.

Press Micro 

↓

 or Micro 

↑

 to move the paper to the position 

you want on the tear bar.

Press Start/Stop to set the tear-off position. 

The printer beeps twice. The paper rolls backward, then goes 
to the new tear-off position.

When the print buffer has not received data for one second, Auto 
Tear-Off automatically moves the continuous form paper to the 
tear-off bar. The print line can be anywhere on the page for Auto 
Tear-Off to function in this mode.

To change the Auto Tear-Off setting in One-Second mode:

Press Start/Stop to take the printer offline.

Press Micro 

↓ 

or Micro 

↑

 to move the paper to the appropriate 

position on the tear bar. The printer beeps if the paper is out of 
range.

Press Start/Stop to set and save the tear-off position. 

The printer beeps twice. The paper rolls backward, then 
advances to the new tear-off position. The Ready light comes 
on.

If your application software has delays between data 
transmissions while Auto Tear-Off is set to one second, partial 
pages may print. To prevent this, set Auto Tear-Off to on.