Honeywell pro th4110d Manual Do Utilizador
PRO TH4110D Programmable Thermostat
3
Wallplate installation
Remove the wallplate from the ther-
mostat as shown at left, then follow
directions below for mounting.
mostat as shown at left, then follow
directions below for mounting.
1
Pull wires through wire hole.
2
Position wallplate on wall, level and
mark hole positions with pencil.
mark hole positions with pencil.
3
Drill holes at marked positions as
shown below, then tap in supplied
wall anchors.
shown below, then tap in supplied
wall anchors.
4
Place wallplate over anchors, insert
and tighten mounting screws.
and tighten mounting screws.
5
Insert quick reference card in slot
in front of wall plate.
in front of wall plate.
Grasp top and bottom of wallplate
and pull to remove from thermostat.
and pull to remove from thermostat.
Drill 3/16” holes for drywall.
Drill 7/32” holes for plaster.
Drill 7/32” holes for plaster.
Wall anchors
Mounting screws
Wire hole
Insert quick reference card after
wallplate is mounted (see mounting
instructions, below)
wallplate is mounted (see mounting
instructions, below)