Vertex Standard FT-60R Manual Do Utilizador

FT-60R O

PERATING

 M

ANUAL

13

O

PERATION

S

ELECTING

 

THE

 O

PERATING

 B

AND

 Press the [BAND(BAND DN)] key repetitively. You will

see the LCD indication move toward a higher frequency
band each time you press the [BAND(BAND DN)] key.

850 MHz 

 144 MHz 

250 MHz 

 350 MHz 

430 MHz 

 850 MHz ……

 If you wish to move the operating band selection down-

ward (toward a lower frequency band), press the [F/W]
key first, then press the [BAND(BAND DN)] key.

350 MHz 

 250 MHz 

144 MHz 

 850 MHz 

430 MHz 

 350 MHz ……

 Once you have selected the desired band, you

may initiate manual tuning (or scanning) per
the discussion in the next chapter.

F

REQUENCY

 N

AVIGATION

The FT-60R will initially be operating in the “VFO” mode, a channelized system which
allows free tuning throughout the currently-selected operating band.

Three basic frequency navigation methods are available on the FT-60R:

1) Tuning Dial

Rotation of the DIAL allows tuning in the pre-programmed
steps established for the current operating band. Clockwise
rotation of the DIAL causes the FT-60R to be tuned toward
a higher frequency, while counter-clockwise rotation will
lower the operating frequency.

If you press the [F/W] key momentarily, then rotate the DIAL,
frequency steps of 1 MHz will be selected. This feature is
extremely useful for making rapid frequency excursions over the wide tuning range of the
FT-60R.

F

REQUENCY

 R

ANGE

108.000 - 200.000 MHz
200.000 - 300.000 MHz
300.000 - 400.000 MHz
400.000 - 520.000 MHz
700.000 - 999.990 MHz

B

AND

144 MHz Band
250 MHz Band
350 MHz Band
430 MHz Band
850 MHz Band