Fujitsu image scanner fi-5950 Manual Do Utilizador
2
■ Removable Parts
1.3 Operator Panel
The operator panel is located on the right side of the
scanner. The panel consists of a Function Number Dis-
play, buttons and a LED.
No.
Name
Description
1
Document
smoother
smoother
Attached when the stacker posi-
tion is set to align the ejected doc-
ument by the leading edge, or
ument by the leading edge, or
when scanning documents with
different widths.
No.
Name
Description
2
Pick rollers
Rollers that pick the paper from
the hopper into the ADF. This is a
consumable item.
consumable item.
3
Separator
rollers
rollers
Rollers used to help separate the
paper as the feeding begins. This
is a consumable item.
4
Brake roller
Roller used to help separate the
paper as the feeding begins. This
paper as the feeding begins. This
is a consumable item.
5
Pad
Separation Pad used to help sepa-
rate the paper as the feeding
begins. This is a consumable
begins. This is a consumable
item.
Send to
Scan
Power
Thickn
ess
Hopper H
eight
Function
Thick
Thin
1
2
3
4
5
Name
Function
Shows the status of the scanner.
.
Use these buttons to adjust the height
of the Hopper to the Upper/Middle/
Lower Positions.
The hopper moves automatically to
The hopper moves automatically to
the right position after giving a scan-
ning command. However, this may
cause a delay before the actual scan-
cause a delay before the actual scan-
ning starts. To avoid unnecessary
waiting time, it is recommended to set
the hopper height prior to scanning.
the hopper height prior to scanning.
The approximate loading capacities
are as follows (* these numbers differ
depending on the document thick-
depending on the document thick-
ness):
Upper: 100 sheets
Middle: 300 sheets
Middle: 300 sheets
Lower: 500 sheets
Use these buttons to adjust the paper
Use these buttons to adjust the paper
thickness for the papers to be scanned.
When picking errors or paper jams
When picking errors or paper jams
occur:
Press the
Press the
(Thin) button.
When multifeed occurs:
Press the
Press the
(Thick) button.
(Normally no need to change from the
default setting)
Use this button to start linked applica-
Use this button to start linked applica-
tion.
When this button is pressed at manual
When this button is pressed at manual
feed mode, the scanning stops immedi-
ately
(*About the settings, refer to the "fi-
(*About the settings, refer to the "fi-
5950 Operator’s Guide" on the
SETUP DVD-ROM).
T
Send to
Scan
Power T
hicknes
s
Hopper Heig
ht
Function
Thick
Thin
Function
Hopper Height
Paper Thickness
Thin
Send to
Scan
Thick
Function number display
Function
Hopper Height
Thin
Thick
Paper Thickness
Send to