Fujitsu 3400 Manual Do Utilizador

Connectors and Peripheral Interfaces

IrDA/FIR port 

1-1

An infrared transceiver built into the pen tablet 
allows you to communicate with other devices 
that are compliant with the IrDA Standard Rev. 
1.1. Effective range for infrared communication is 
about 3 feet, and within 15 degrees off of center. 
A clear line-of-sight path must exist between the 
IrDA port on the pen tablet and the IrDA 
transceiver on the other device.

Modem

1-1

Connect a telephone line to the optional internal 
modem using a standard RJ-11 telephone plug.

High-Usage 
Metal Contacts

1-2

Install the pen tablet in an approved docking 
device. The contacts provide DC input and USB 
interface.

System 

interface port

†

1-2

Connect the Stylistic 3400 port replicator or other 
approved docking device. Refer to the 
documentation accompanying the docking device 
for more information.

Infrared 
keyboard port

1-1, 
1-2

An infrared receiver built into the pen tablet allows 
you to communicate with a wireless infrared 
keyboard. The keyboard infrared port works 
optimally between 10 to 30 cm (approximately 
4 in. to 12 in.) from the keyboard infrared port, 
located on the bottom edge of the pen tablet. 
Ensure that there is a clear line-of-sight path 
between the infrared receiver on the pen tablet 
and the infrared transmitter on the keyboard. 

Kensington

TM

 

Lock slot

1-2

The Kensington

 

Microsaver

TM

 security slot allows 

you to

 

secure the pen tablet using 

Kensington-compatible locking devices.

Table 1-2   Peripheral Connectors/Interfaces

†

Open the connector door to access these connectors.