Fujitsu fi-6140 Manual Do Utilizador

iii

PFU LIMITED
International Sales Dept., Imaging Business Division, 
Products Group 
Solid Square East Tower, 580 Horikawa-cho, Saiwai-
ku, Kawasaki-shi Kanagawa 212-8563, Japan
Phone : (81-44) 540-4538

All Rights Reserved. Copyright © PFU LIMITED 2007

The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner or 
an authorized FUJITSU Image Scanner service 
provider to make repairs to this product.

Warning Label 

The screen examples in this manual are subject to 
change without notice in the interest of product 
improvement. If the actual displayed screen differs 
from the screen examples in this manual, operate by 
following the actual displayed screen while referring to 
the User's Manual of the scanner application you are 
using. 
The screenshots in this manual were captured from 
FUJITSU TWAIN32 scanner driver, ScandAll PRO 
Image Capturing Utility Software, FUJITSU ISIS 
scanner driver, QuickScan Pro™ image capturing 
software and Adobe

®

 Acrobat

®

.

■ Safety Precautions

WARNING

This indication alerts operators to an 

operation that, if not strictly observed, 

may result in severe injury or death.

CAUTION

This indication alerts operators to an 

operation that, if not strictly observed, 

may result in safety hazards to 

personnel or damage to equipment.

ATTENTION

This symbol alerts operators to particularly 

important information. Be sure to read this 

information.

HINT

This symbol alerts operators to helpful advice 

regarding operation.

A TRIANGLE symbol indicates that special care 

and attention is required.

The drawing inside the triangle shows the 

specific caution. 

A CIRCLE with a diagonal line inside shows 

action which users may not perform.

The drawing inside or under the circle shows the 

specific action that is not allowed.

R

Outline characters on a colored background show 

instructions users should follow. 

It may also include the drawing that shows the 

specific instruction.

The glass surface inside the ADF becomes hot 

during the operation. Be careful not to touch the 

glass surface inside the ADF. 

ATTENTION

Do NOT remove from the scanner, stain or scratch the 
warning labels.

WARNING

Do not damage the AC cable.

A damaged AC cable may cause fire or electric shock. 

Do not place heavy objects on AC cables, or pull, 

bend, twist, heat, damage or modify AC cables. 

Do not use damaged AC cables or power plugs, or 

install any cables or power plugs to loose wall 

sockets.

Use only specified AC cables and connector 

cables.

Use only specified AC cables and connector cables. 

Failure to use the correct cables might cause electric 

shock and/or equipment failure.

Please don’t use the AC cable provided with this 

scanner for other devices, since this might cause 

equipment failure and other troubles or an electric 

shock.

Make sure to ground the scanner.

Make sure to ground to avoid electric shock.

Be sure to ground before plugging into a power outlet.

Unplug from the outlet before removing the ground 

connection.

Use this scanner only at the indicated power 

voltage. Do not connect to multiple-power 

strips.

Use this scanner only at the indicated power voltage 

and current. Improper power voltage and current 

might cause fire or electric shock. Do not connect to 

multiple-power strips.

Do not touch the AC cable with wet hands.

Do not touch the power plug with wet hands. Doing so 

might cause electric shock.

Wipe any dust from the power plug.

Wipe off any dust from metal parts on the power plug 

or metal fittings with a soft, dry cloth. Accumulated 

dust might cause fire or electric shock.

Do not install the device in locations that 

has oil smoke, steam, humidity, and dust.

Do not install the scanner in locations subject to oil 

smoke, steam, humidity, and dust. Doing so might 

cause a fire or electric shock.