Fujifilm FinePix S2800HD Manual Do Utilizador

Página de 142
vii
For Your Safety
• Do not store batteries in warm or 
humid places.
• Keep the batteries out of reach of 
babies and small children.
•  Make sure that the battery polarity 
(
C and D) is correct.
• Do not use new with used batter-
ies. Do not use charged and dis-
charged batteries together.
• Do not use diff erent types or 
brands of batteries at the same 
time.
• If you do not intend to use the 
camera for a long period of time, 
remove the batteries from the 
camera. Note if the camera is left 
with the batteries removed, the 
time and date settings are cleared.
• The batteries feel warm right af-
ter being used. Before removing 
the batteries, turn the camera off  
and wait for the batteries to cool 
down.
•  Since batteries do not work well in 
cold weather or locations, warm 
the batteries by placing them in-
side  your  garments  before  use. 
Batteries do not work well when 
cold. They will work again when 
the temperature returns to normal.
• Soil (such as fi ngerprints) on the 
battery terminals makes the bat-
teries charge less reducing the 
number of images. Carefully wipe 
the battery terminals with a soft 
dry cloth before loading.
If any liquid at all leaks from 
the batteries, wipe the battery 
compartment thoroughly and 
then load new batteries.
If any battery fl uid comes into 
contact with your hands or 
clothing, fl ush the area thor-
oughly with water. Note that 
battery fl uid can cause loss 
of eyesight if it gets into your 
eyes. If this occurs, do not rub 
your eyes. Flush the fl uid out 
with clean water and contact 
your physician for treatment.
 Using the AA-size Ni-MH batteries 
correctly
• Ni-MH batteries left unused in 
storage for long periods can be-
come “deactivated”. Also, repeat-
edly charging Ni-MH batteries 
that are only partially discharged 
can cause them to suff er from the 
“memory eff ect”. Ni-MH batteries 
that are “deactivated” or aff ected 
by “memory” suff er from the prob-
lem of only providing power for a 
short time after being charged. To 
prevent this problem, discharge 
and recharge them several times 
using the camera’s “Discharging 
rechargeable batteries” function.
  Deactivation and memory are spe-
cifi c to Ni-MH batteries and are not 
in fact battery faults.
 See Owner’s Manual for the proce-
dure for “Discharging rechargeable 
batteries”.
 CAUTION
 CAUTION
Do not use the “Discharging re-
chargeable batteries” function when 
alkaline batteries being used.
•  To charge Ni-MH batteries, use the 
quick battery charger (sold sepa-
rately). Refer to the instructions 
supplied with the charger to make 
sure that the charger is used cor-
rectly.
• Do not use the battery charger to 
charge other batteries.
• Note that the batteries feel warm 
after being charged.
•  Due to the way the camera is con-
structed, a small amount of current 
is used even when the camera is 
turned off .  Note  in  particular  that 
leaving Ni-MH batteries in the 
camera for a long period will over-
discharge the batteries and may 
render them unusable even after 
recharging.
•  Ni-MH batteries will self-discharge 
even when not used, and the time 
for which they can be used may be 
shortened as a result.
• Ni-MH batteries will deteriorate 
rapidly if over-discharged (e.g. 
by discharging the batteries in a 
fl ashlight). Use the “Discharging re-
chargeable batteries” function pro-
vided in the camera to discharge 
the batteries.
• Ni-MH batteries have a limited 
service life. If a battery can only 
be used for a short time even after 
repeated discharge-charge cycles, 
it may have reached the end of its 
service life.
 Disposing of Batteries
• When disposing of batteries, do 
so  in  accordance  with  your  local 
waste disposal regulations.
3
  Notes on both models (
1
2
)
 AC Power Adapter
Always use the AC Power Adapter 
with the camera. The use of an AC 
Power adapter other than FUJIFILM 
AC Power Adapter can be damaged 
to your digital camera.
For details on the AC power adapter, 
refer to the Owner’s Manual of your 
camera.
• Use the AC power adapter for in-
door use only.
•  Plug the connection cord plug se-
curely into the DC input terminal.
• Turn off  the FUJIFILM Digital cam-
era before disconnecting the cord 
from the DC input terminal. To dis-
connect, pull out the plug gently. 
Do not pull on the cord.
• Do not use the AC power adapter 
with any device other than your 
camera.
•  During use, the AC power adapter 
will become hot to the touch. This 
is normal.