Fujitsu sparc enterprise m8000-m9000 Manual Do Utilizador

Installation Steps for SPARC Enterprise M8000/M9000 Servers

Step 1

• Check the power source, air conditioning equipment, and location of the installation

site. For details, see the SPARC Enterprise M8000/M9000 Servers Site Planning Guide.

Step 2

• Unpack the product package by referencing the SPARC Enterprise M8000/M9000

Servers Unpacking Guide, which comes with the server.

Step 3

• Install the main unit. If there is an expansion cabinet to be connected to the SPARC

Enterprise M9000 server, or a power supply cabinet to be mounted in the SPARC
Enterprise M8000 server or SPARC Enterprise M9000 server, connect each of them to
the relevant cabinet. For details, see the SPARC Enterprise M8000/M9000 Servers
Installation Guide.

Step 4

• Connect the input power cables to the main unit. For details, see the SPARC

Enterprise M8000/M9000 Servers Installation Guide.

Step 5

• Connect the console to the main unit. For details, see the SPARC Enterprise M8000/

M9000 Servers Installation Guide.

Step 6

• Turn on the main line switch of the main unit. For details, see the SPARC Enterprise

M8000/M9000 Servers Installation Guide.

Step 7

• Set necessary information for hardware. For details, see the SPARC Enterprise M8000/

M9000 Servers Installation Guide.

Step 8

• Turn on the power to the main unit. POST is automatically executed after power-

on. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.

Step 9

• Set a LAN port on the XSCF unit and connect it. For details, see the SPARC Enterprise

M8000/M9000 Servers Installation Guide and the SPARC Enterprise M3000/M4000/
M5000/M8000/M9000 Servers XSCF User’s Guide.

Step 10

• If you are installing other peripheral devices in the main unit, proceed to Step 11.
• If you are not installing peripheral devices in the main unit, proceed to Step 14.

Step 11

• Turn off the power to the main unit. For details, see the SPARC Enterprise M8000/

M9000 Servers Installation Guide.

Step 12

• Install other peripheral devices. For details, see manuals supplied with each

peripheral device.

Step 13

• Turn on the power to the main unit. POST is automatically executed after power-on.

For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.

Step 14

• Check the network connection of domain. For details, see the SPARC Enterprise

M8000/M9000 Servers Installation Guide.

Step 15

• Confirm the operation by using Oracle VTS. For details, see the SPARC Enterprise

M8000/M9000 Servers Installation Guide and the Oracle VTS User's Guide

Step 16

• Perform the setup required for the operation of the system. For details, see the

SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide.