Fujifilm finepix f610 Manual Do Utilizador
13
Getting Ready
12
CHARGING THE BATTERY
CHECKING THE REMAINING BATTERY CHARGE
DC IN 5V
(power input) socket
(power input) socket
1
2
Check that the camera is switched off. Plug the AC power adapter connector into the DC IN 5V
socket on the camera and then plug the adapter itself into the main power outlet.
socket on the camera and then plug the adapter itself into the main power outlet.
The self-timer lamp lights (blue) and battery
charging begins. When charging is completed, the
self-timer lamp switches off.
charging begins. When charging is completed, the
self-timer lamp switches off.
h Full recharging times for completely depleted
battery
(At an ambient temperature of +21°C to +25°C/
+69.8°F to +77°F)
NP-40: Approx. 2 hours
(At an ambient temperature of +21°C to +25°C/
+69.8°F to +77°F)
NP-40: Approx. 2 hours
●
!
Charging times increase at low temperatures.
●
!
If the self-timer lamp blinks during charging, a charging error
has occurred and the battery cannot be charged. If this
occurs, see P.98.
has occurred and the battery cannot be charged. If this
occurs, see P.98.
●
!
Switching the camera on during charging interrupts the
charging.
charging.
●
!
You can charge the battery more quickly by using the BC-65
Battery Charger (sold separately) (
Battery Charger (sold separately) (
➡P.92).
Using the AC Power Adapter
Use the AC power adapter to avoid losing
power at inconvenient times, such as when you
are downloading photographed images to your
computer. Using the AC power adapter also
allows you to take pictures and playback
images without worrying about depleting the
battery.
power at inconvenient times, such as when you
are downloading photographed images to your
computer. Using the AC power adapter also
allows you to take pictures and playback
images without worrying about depleting the
battery.
h Compatible AC power adapters
AC-5VW/AC-5VH/AC-5VS/AC-5VHS
●
!
Use only the FUJIFILM products listed on the left.
●
!
See P.94 for notes on using the AC power adapter.
●
!
Only connect or disconnect the AC power adapter when
the camera is switched off.
Connecting or disconnecting the AC power adapter
while the camera is switched on temporarily interrupts
the power supply to the camera, so that images or
movies being shot at the time are not recorded. Failing
to switch the camera off first can also result in damage
to the xD-Picture Card or malfunctions during PC
connection.
the camera is switched off.
Connecting or disconnecting the AC power adapter
while the camera is switched on temporarily interrupts
the power supply to the camera, so that images or
movies being shot at the time are not recorded. Failing
to switch the camera off first can also result in damage
to the xD-Picture Card or malfunctions during PC
connection.
●
!
The shape of the plug and socket-outlet depends on the
country of use.
country of use.
●
!
Batteries with no remaining charge (
V
blinking red) will
cause problems such as loss of power while the lens is still
extended. Always charge the battery before use.
extended. Always charge the battery before use.
◆
Power Save Function
◆
If the camera is not used in any way for approx. 30 seconds when the camera functions are enabled,
this function temporarily switches features such as the LCD monitor off to reduce power consumption
(
this function temporarily switches features such as the LCD monitor off to reduce power consumption
(
➡P.73). If the camera is then left unused for a further period (2 minutes or 5 minutes), the Auto Power
Save function automatically switches the camera off. To switch the camera back on, set the Power
switch to “OFF” briefly and then back to “
switch to “OFF” briefly and then back to “
q
” or “
w
”. Also, if the display panel is not used for
approximately 5 seconds, the backlight switches off.
“
Z
”, “
X
” or “
C
” are displayed as a small
icons on the right-hand side of the LCD monitor.
●
!
The information above is an approximate guide for
photography mode. In other camera modes, the transition
from “
photography mode. In other camera modes, the transition
from “
X
” to “
V
” may occur more quickly.
●
!
Due to the nature of the battery, the battery low warning may
appear early when the camera is used in cold locations. This
is normal and does not indicate a fault. Try warming the
battery in your pocket or a similar location before use.
appear early when the camera is used in cold locations. This
is normal and does not indicate a fault. Try warming the
battery in your pocket or a similar location before use.
“
V
” appears as a large icon on the LCD monitor.
1 There is ample remaining battery charge. (Only
displayed for approximately 3 seconds when the
camera is switched on or the mode is changed.)
camera is switched on or the mode is changed.)
2 The battery is approximately half charged. (Only
displayed for approximately 3 seconds when the
camera is switched on or the mode is changed.)
camera is switched on or the mode is changed.)
3 Battery charge low. Replace or recharge the
battery as it will run out shortly.
4 The battery is run out. The display will shortly go
blank and the camera will stop working. Replace
or recharge the battery.
or recharge the battery.
Blinking red
Lit white
Lit red
1
1
2
2
4
4
3
3
Lit white
Switch the camera on and check whether one of the battery level warnings (
X
,
C
or
V
) is
displayed on the LCD monitor. If nothing is displayed, the battery has sufficient charge.
１Ｍ
１Ｍ
33
AUTO
AUTO
１Ｍ
AUTO