Fujitsu m3099ex-eh Manual Do Utilizador

M3099EX/EH OEM Manual

3-17

Commands sent from the host computer to the scanner are as listed
in Table 3.6.  The scanner commands are as follows:

CLEAR

CONTROL

 

IMAGE 
CONTROL

PRINT 
CONTROL

START

READ

SENSE

RETURN 
SENSE

IMAGE 
MODE 
SENSE

SEND 
DITHER 1

SEND 
DITHER 2

SEND DATA

INQUIRY

44

58

5A

5E

53

54

41

42

43

46

47

48

40

This command initializes the scanner.
This command can be issued at any time.

This command sets the operation mode of 
the scanner and the operation mode in the 
main window.

This command sets the image processing 
mode of the scanner.  (*1)

This command instructs how to print to the 
manuscript.  (*2)

This command reports the size of a 
document to be read.

This command starts reading.  The scanner 
starts reading according to the operation 
mode set previously.

This command requests a status report.

This command requests a status report on 
the return of the flatbed read.

This command requests a status report of 
the image processing mode of each main 
window and the number of pixels (in units 
of a byte) per line in the X- direction.

This command transfers the dither and 
overlay patterns.

This command transfers the dither, 

γ

 curve, 

or overlay patterns.

Transfers print pattern and data items.  (*2)

This command requests a device 
information report.

*1: This command can be transmitted only when the image processing 

option is connected.

*2: This command can be transmitted only when the endorser option is 

connected.