Fujifilm finepix 4900 Manual Do Utilizador
21
1
20
SETTING THE DATE AND TIME
1
2
3
4
➀
Set the Mode switch to “
0
”
➁
Set the Mode
dial to “
2
”. The SET-UP screen appears on
the LCD monitor.
●
!
2
” (SET-UP) mode menu.
●
!
If at least 3 hours have passed since the AC power
adapter was connected or the battery was inserted,
the date and time settings are maintained for roughly
1 hour even when the camera has no power supply
(when the AC power adapter is disconnected and
the battery is removed).
adapter was connected or the battery was inserted,
the date and time settings are maintained for roughly
1 hour even when the camera has no power supply
(when the AC power adapter is disconnected and
the battery is removed).
When you have finished setting the date and
time, press the “MENU/OK” button to confirm the
setting. The SET-UP screen then reappears.
To exit the “
time, press the “MENU/OK” button to confirm the
setting. The SET-UP screen then reappears.
To exit the “
2
” mode, set the mode dial to any
mode other than the “
2
” mode.
➀
Use “
a
” or “
b
” to select “DATE/ TIME”.
➁
Press the “MENU/OK” button.
If the date and time settings are cleared when
you switch the camera on, a confirmation
screen appears. If you chose to reset the
date and time, proceed from step
you switch the camera on, a confirmation
screen appears. If you chose to reset the
date and time, proceed from step
.
3
Use the “
d c
” button to select the desired item
and then use the “
a
” and “
b
” buttons to correct
the setting.
●
!
If you hold down “
a
” or “
b
”, the numbers change
continuously.
●
!
You cannot set seconds.
●
!
When the time displayed passes “12:00:00”, the
AM/PM setting automatically switches.
AM/PM setting automatically switches.
●
!
If you selected “
2
” when you switched the camera
on, the camera switches to photography or playback
mode.
mode.
●
!
To set the time precisely, press the “MENU/OK”
button when the time is at zero seconds.
button when the time is at zero seconds.
●
➀
●
➁
●
➀
●
➁