Fujitsu MHZ2080BJ Manual Do Utilizador
3.3 Connections with Host System
3.3.4 SATA interface cable connection
The cable that connects the disk drive to the host system must be compliant with
the Serial ATA Revision 2.6 specification.
the Serial ATA Revision 2.6 specification.
3.3.5 Note about SATA interface cable connection
Take note of the following precaution about plugging a SATA interface cable into
the SATA interface connector of the disk drive and plugging the connector into a
host receptacle:
the SATA interface connector of the disk drive and plugging the connector into a
host receptacle:
When plugging together the disk drive SATA interface connector
and the host receptacle or SATA interface cable connector, do not
apply more than 10 kgf of force in the connection direction once
they are snugly and securely in position.
and the host receptacle or SATA interface cable connector, do not
apply more than 10 kgf of force in the connection direction once
they are snugly and securely in position.
Connecting/removing the cable without releasing the SATA
interface Latch may lead to connector damage and the loss of the
Latch function. Accordingly, be sure to connect/remove the cable
while releasing the Latch.
interface Latch may lead to connector damage and the loss of the
Latch function. Accordingly, be sure to connect/remove the cable
while releasing the Latch.
C141-E280
3-11