fujitsu-siemens lifebook b Manual Do Utilizador
Memory extension
Working with your notebook
A26391-K105-Z120-1-7619
31
Memory extension
!
The notebook must be switched off when installing/removing the memory modules. The
notebook may not be in the Suspend mode.
notebook may not be in the Suspend mode.
So that the current data can be saved in the
Save to Disk
suspend mode, sufficient
memory space must be available on the hard disk (at least the size of the main
memory + 2 Mbytes).
memory + 2 Mbytes).
Install only memory expansions that satisfy the requirements and rules governing safety,
RFI and electromagnetic compatibility and relating to telecommunications terminal
equipment (see the chapter "
RFI and electromagnetic compatibility and relating to telecommunications terminal
equipment (see the chapter "
Use only memory expansions which have been released for your
LIFEBOOK
(64, 128 and
256 Mbyte modules, SD RAM, JEDEC 144 pin SO DIMM, 3,3 V).
Never use force when installing or removing memory modules.
Make sure that foreign objects do not fall into the memory module compartment.
The main memory of your notebook can be expanded to 64 -256 Mbytes using a 64, 128, or
256 Mbytes memory module. The notebook will not start without a memory module, as no fixed
main memory is installed.
256 Mbytes memory module. The notebook will not start without a memory module, as no fixed
main memory is installed.
Installing/removing memory extension
Ê
Switch off the notebook.
Ê
Remove the battery.
Ê
Unplug the power adapter from the mains
outlet.
outlet.
Ê
Close the LCD panel of the notebook so
that it locks into place.
that it locks into place.
Ê
Disconnect all cables connected to the
notebook.
notebook.
Ê
Place the notebook upside down on a flat
surface.
surface.
Ê
Remove the screw.
Ê
Lift the cover and pull it (in the direction of
the arrow) away from the notebook.
the arrow) away from the notebook.