calorique thermolar tank warming system Manual Do Utilizador
I
NTRODUCTION
The Calorique Thermolar® Tank Temperature Maintenance System is
a low heat-density warming system designed to safely and efficiently
maintain the contents temperature of any tank. Ideal for process
control, adhesive storage (etc.) the THERMOLAR system provides uni-
form heat that won’t scorch tank contents.
a low heat-density warming system designed to safely and efficiently
maintain the contents temperature of any tank. Ideal for process
control, adhesive storage (etc.) the THERMOLAR system provides uni-
form heat that won’t scorch tank contents.
When installed and operated in accordance with these instructions,
the Thermolar system complies with National Electrical Code article
427. Failure to install and operate this system in accordance with
the manufacturer’s instructions may result in an unsafe condition
and constitutes a violation of the system warranty and voids that
warranty. Note that the system must be installed on a branch circuit
that is protected by a fault detector that is suitable for equipment
protection.
the Thermolar system complies with National Electrical Code article
427. Failure to install and operate this system in accordance with
the manufacturer’s instructions may result in an unsafe condition
and constitutes a violation of the system warranty and voids that
warranty. Note that the system must be installed on a branch circuit
that is protected by a fault detector that is suitable for equipment
protection.
P
ARTS
& S
PECIFICATIONS
PARTS — SUPPLIED BY CALORIQUE
Cross check all parts with the System Components List to ensure that
all parts are included and in good condition before beginning instal-
lation. Quantities and/or lengths are included in the System
Components List.
all parts are included and in good condition before beginning instal-
lation. Quantities and/or lengths are included in the System
Components List.
The following specifications are generic to the Thermolar system.
Complete specifications for the particular system being installed are
included on the System Components List.
Complete specifications for the particular system being installed are
included on the System Components List.
CCo
on
nttrro
oll U
Un
niitt
Included with the control unit are a strap for attaching it to the tank
and two remote thermo-sensors with 20 foot/6 m leads.
and two remote thermo-sensors with 20 foot/6 m leads.
Voltage:
THS-106:
120 Vac
THS-206:
240 Vac
INTRODUCTION
Confirm system voltage before con-
necting the system to power supply. Do
not connect systems to any voltage
other than that for which they were
designed.
necting the system to power supply. Do
not connect systems to any voltage
other than that for which they were
designed.
Systems operated at higher than
designed voltage pose a risk of electric
shock and/or fire.
designed voltage pose a risk of electric
shock and/or fire.
Systems operated at lower than
designed voltage may not maintain
temperature which could result in loss
of or damage to contents.
designed voltage may not maintain
temperature which could result in loss
of or damage to contents.
Note
The Thermolar System is designed for temperature maintenance only and typically will
not provide sufficient heat to significantly raise the temperature of tank contents.
not provide sufficient heat to significantly raise the temperature of tank contents.