Panasonic KX-FLB881 Guia De Utilização
2. Preparation
15
For assistance, please visit http://www.panasonic.com/help
2 Preparation
2For assistance, please visit http://www.panasonic.com/help
Connections and Setup
2.1 Connections
Caution:
L
When you operate this product, the power outlet
should be near the product and easily
accessible.
should be near the product and easily
accessible.
Note:
L
If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
telephone line, this unit may disturb the network
condition of the device.
Using surge protectors
L
The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using surge protectors (
line surges or lightning. For additional protection, we
recommend using surge protectors (
9).
If the unit shares a single telephone line with a DSL
service
Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Caller ID (page 47) may not function
properly. A filter to prevent this is provided by your
provider. Please attach the filter (
service
Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Caller ID (page 47) may not function
properly. A filter to prevent this is provided by your
provider. Please attach the filter (
j) to the telephone
line cord of the unit.
1 Power cord
L
Connect to a power outlet
(120 V, 60 Hz).
(120 V, 60 Hz).
2 Telephone line cord
L
Connect to a single telephone line jack (RJ11).
3 [EXT] jack
L
You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
extension telephone. Remove the stopper if
attached.
4 Answering machine (not supplied)
5 Handset unit (optional) connection jack
L
You can connect the optional handset unit (page
66). Remove the seal if attached.
66). Remove the seal if attached.
6 Network router/Network hub (not supplied)
L
Also connect networked computers.
7 To the internet
8 LAN cable (not supplied)
L
To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).
use only shielded LAN cable (category 5 straight
cable).
7
8
3
6
1
9
4
2
5
Important notice for the USB connection
L
Do NOT connect the USB cable until prompted by
the Multi-Function Station (page 22).
the Multi-Function Station (page 22).
j
FLB881-PFQX2732ZA-OI-en.book Page 15 Wednesday, July 18, 2007 11:22 PM