Kenwood DDX574BH Manual Do Proprietário

ENGLISH

79

R  Connecting wires to terminals for DDX794/DDX774BH/DDX594/DDX574BH/DDX417BT/DDX394

See page 83.

See page 83.*

1

See page 84.

USB terminal (1.0 m): See page 82.

10 A fuse

Ignition key switch

Fuse box

Battery

Connect to the vehicle’s reverse lamp harness when using 
the optional rear view camera.

Connect to the vehicle’s parking 
brake detection switch harness.
•  For best safety, be sure to connect 

the parking sensor.

Not used.

To the remote adapter (not supplied) which is compatible with your car.

To car light control switch.

To car chassis

Purple with white stripe (Reverse sensor wire)

Light green (Parking sensor wire)

See page 83.*

1

See page 83.

1

White 

ª / White with black stripe · : To front speaker (left)

Gray 

ª / Gray with black stripe · : To front speaker (right)

Green 

ª / Green with black stripe · : To rear speaker (left)

Purple 

ª / Purple with black stripe · : To rear speaker (right)

Brown (Mute control wire)

Light blue with yellow stripe (Steering remote control wire)

Orange with white stripe (Dimmer control wire)

Red (Ignition wire)

Yellow (Battery wire)

Black (Ground wire)

*

1

  Only for DDX794/DDX774BH/DDX594/DDX574BH/DDX394.

*

2

  Only for DDX417BT.

*

3

  If no connections are made, do not let the cable come out 

from the tab.

*

3

Connect the antenna cord 
to the antenna terminal.

*

1

*

2

3

To the power control terminal when using the optional power amplifier.
(Or)
To the control terminal of the motor antenna or to the power terminal for the 
booster amplifier of film-type antenna.

Blue with white stripe (Power control wire/Antenna control wire) (12 V 

 350 mA)

2017DDX-Entry_K.indb   79

2016/10/31   13:12