Kenwood DDX574BH Manual Do Proprietário

84

R  Connecting microphone for Bluetooth

Connect the microphone (

8) to the MIC terminal.

•  To install the microphone, peel off the adhesive 

tape, fix on the installation position, then adjust 
the direction of the microphone to face the driver. 
After installing, fix the microphone cable to the car 
with clamps (commercially available).

8

R Removing the trim plate

  Engage the catch pins on the extraction 

key (

4) and remove the two locks on the 

lower part. Lower the frame and pull it 
forward.

4

  Remove from the upper two catches.

•  The frame can be removed from the top side in 

the same manner.

R Removing the unit

  Remove the trim plate. (See the left 

column.)

  Insert the two extraction keys (

4), then 

pull them as illustrated so that the unit can 
be removed.

4

•  Be careful to avoid injury from the catch pins on 

the extraction key.

2017DDX-Entry_K.indb   84

2016/10/31   13:12