AudioControl LC6i Manual Do Proprietário

Quick Installation Information

For those of you short on time but high on ambition, we offer the fol-

lowing section to speed up your installation of the LC6i: 

1. Physically mount the LC6i in a location that keeps it away from 

soda spills, food crumbs, and curious ngers.  You will want to select a 
location that allows you access to the level controls.  In many cases you 
can nd factory speaker leads in the rear of the vehicle that are easy to 
access.

2. The LC6i needs to be installed in the signal path between your OEM 

source unit or factory-installed amplier(s) and an aftermarket external 
amplier and/or processor(s).  Locate the speaker wires that are coming 
from your factory source unit and/or amplier and connect them to the 
speaker-level inputs on your LC6i.

3. Connect the Output RCA connectors to cables that run to your after-

market external signal processors and/or ampliers. If this is not obvious 
to you, quickly pack up your LC6i and run to your nearest authorized 
AudioControl dealer to have them perform the installation.  You will 
thank us later.

4. Connect +12 power, ground, and remote turn-on (if applicable).
5. Level match your LC6i to your source and ampliers.
Note: You will want to turn the gains DOWN on your aftermarket am-

If you need to know more, then read on.  Heck, if you don’t need to 

know more, still read on, because you can never know too much and as 
much as we would like to get your calls and e-mails, most of the answers 
to your questions are in this manual!