Rockford Fosgate PMX-3 Manual Do Proprietário

7

To access the source unit’s settings, long press the MENU button until 
the options appear. Rotate the encoder to scroll through the list of 
settings and short press the encoder button to select the setting you 
wish to change. (BALANCE>FADER>AUDIO>VOLTAGE GAUGE>BT 
PAIRING>BEEP>TUNER REGION>SOFTWARE>FACTORY DEFAULT)

This source unit has a zero current draw when turned off. All of your 
settings and presets will be saved along with your boat’s battery during 
storage.

Short press the encoder button to access BALANCE adjustment settings. 
Rotate the encoder button to set output BALANCE.

Short press the encoder button to access FADER adjustment settings. 
Rotate the encoder button to set output FADER.

To access the AUDIO settings, short press the AUDIO option from 
the MENU screen. Rotate the encoder to scroll through the list of 
settings and short press the encoder button to select the setting you 
wish to change. (7 BAND EQ>CROSSOVER>PEQ>REAR RCA>AUX 
INPUT>SOURCE GAIN>INTERNAL AMPLIFIER)

Short press the encoder button to access the 7 BAND EQ settings. Use 
the rotary encoder to scroll through the EQ settings. (FLAT > ROCK 
> CLASSIC > ACOUSTIC > DANCE > ELECTRONIC > HIP-HOP > 
CUSTOM) When setting up the CUSTOM EQ, short press the encoder 
button to set the first frequency. Once active, rotate the encoder to adjust 
the frequency settings. Short press encoder button again to access the 
next frequency. Repeat until all EQ settings are complete. Short press the 
MENU button to exit and go back up one level.

Short press to access the CROSSOVER settings. Use the rotary 
encoder to select the crossover zone options (FRONT>REAR>SUB). 
Short press the encoder to adjust the frequency of the crossover 
(60Hz>80Hz>120Hz>APF). Short press MENU to exit and go back up 
one level.

Short press to access the REAR RCA options. Use the rotary encoder to 
select options (LINE OUT>SUBWOOFER).

Short press to access the PUNCH EQ settings. Use the rotary encoder 
to adjust the gain output (0-12). Short press MENU to exit and go back 
up one level.

Punch EQ is an onboard equalizer with up to +18dB @ 45Hz and/or up to 
+12dB boost at 12.5kHz  

RENAME – To rename AUX, short press the encoder button to set the first 
letter of the new name. Once active, rotate encoder to adjust letters. Short 
press the encoder button again to set the next letter. Repeat until AUX has 
been renamed. Short press MENU to exit and go back up one level.

ENABLE – The PMX-3 comes with SXM enabled, to change to AUX you 
will need to short press the encoder button to access options. Rotate the 
encoder button to select AUX instead of SXM. (SXM > AUX)

To adjust the level of device input gain, scroll through the inputs (FM 
TUNER>AM TUNER>WB TUNER>USB>AUX>BLUETOOTH>PANDORA) 
to the device you want to adjust, short press the encoder button to access 
the gain settings. Rotate the encoder button to set the level of gain. (-3dB 
> -2dB > -1dB > 0dB > +1dB > +2dB > +3dB)

Short press to access the INTERNAL AMPLIFIER options. Use the rotary 
encoder to select options (ON>OFF). When using an amplifier to power 
your speakers, select OFF. If you are powering your speakers directly 
from the source unit, select the INTERNAL AMPLIFIER to ON.

To display the vehicle voltage, short press the encoder button on the 
VOLTAGE GAUGE option.

Short press the encoder button to access options (DISCOVERABLE > 
DEVICE).

Rotate the encoder button to select if unit is discoverable for pairing. 
(ENABLE > DISABLE) Once enabled, the source unit is now discoverable 
and ready for pairing to your device. Open the Bluetooth settings on your 
device to find the source unit labeled “Rockford PMX” and select.

Selecting DEVICE by short pressing the encoder button will allow you 
to rename the source unit with up to 16 characters. This gives you 
the ability to have a unique name for easy identification during device 
pairing. Short press the encoder button to select the letter to be changed 
and rotate the knob to change the value. Repeat process until desired 
name is reached.

Short press the encoder button to access the BEEP options. Rotate the 
encoder button to turn system beep ON/ OFF.

To adjust, short press the encoder button to access. Rotate the encoder 
button to select the TUNER REGION of your preference. (EUROPE > USA 
> RUSSIA > LATIN > ASIA > JAPAN > MIDEAST > AUSTRALIA)

VERSION - Short press the encoder button to display the current 
firmware version of the unit.

UPDATE - Short press the encoder button to update the firmware. Follow 
the instructions on the screen when updating.

To adjust the THEME, short press the encoder to access the feature. 
Rotate the encoder button to select the desired THEME (DAY, NIGHT, 
AUTO)