Rockford Fosgate PMX-5CAN Manual Do Proprietário

7

To access the source unit’s settings, long press the MENU button until 
the options appear. Rotate the encoder to scroll through the list of 
settings and short press the encoder button to select the setting you wish 
to change. (ZONES>BALANCE>FADER>AUDIO>VOLTAGE GAUGE>BT 
PAIRING>BEEP>TUNER REGION>SOFTWARE>FACTORY DEFAULT)

This source unit has a zero current draw when turned off. All of your 
settings and presets will be saved along with your boat’s battery during 
storage.

To setup ZONE 1 or ZONE 2, short press the encoder button to access the 
submenu. Rotate the encoder button to select ZONE options. (SOURCE > 
RENAME > ENABLE/DISABLE/LOCK)

NOTE: During regular listening, long press the encoder button to switch 
between zones.

To select the source, short press the encoder button to access the 
submenu. Use the rotary encoder to scroll through EQ Settings. (FM 
TUNER > AM TUNER > WB TUNER > USB > AUX > BLUETOOTH > 
PANDORA > SiriusXM)

To rename ZONE, short press the encoder button to set the first letter of 
the new name. Once active, rotate encoder to adjust letters. Short press 
the encoder button again to set the next letter. Repeat until ZONE has 
been renamed. Short press MENU to exit and go back up one level.

Short press the encoder button to access. Rotate the encoder button to 
select ENABLE/DISABLE/LOCK. Selecting LOCK will enable ZONE 2 and 
LOCK the source of ZONE 2 to ZONE 1.

Short press the encoder button to access BALANCE adjustment settings. 
Rotate the encoder button to set output BALANCE.

Short press the encoder button to access FADER adjustment settings. 
Rotate the encoder button to set output FADER.

To access the AUDIO settings, short press the AUDIO option from 
the MENU screen. Rotate the encoder to scroll through the list of 
settings and short press the encoder button to select the setting you 
wish to change. (7 BAND EQ>CROSSOVER>PEQ>REAR RCA>AUX 
INPUT>SOURCE GAIN>INTERNAL AMPLIFIER)

Short press the encoder button to access the 7 BAND EQ settings. Use 
the rotary encoder to scroll through the EQ settings. (FLAT > ROCK 
> CLASSIC > ACOUSTIC > DANCE > ELECTRONIC > HIP-HOP > 
CUSTOM) When setting up the CUSTOM EQ, short press the encoder 
button to set the first frequency. Once active, rotate the encoder to adjust 
the frequency settings. Short press encoder button again to access the 
next frequency. Repeat until all EQ settings are complete. Short press the 
MENU button to exit and go back up one level.

Short press to access the CROSSOVER settings. Use the rotary 
encoder to select the crossover zone options (FRONT>REAR>SUB). 
Short press the encoder to adjust the frequency of the crossover 
(60Hz>80Hz>120Hz>APF). Short press MENU to exit and go back up 
one level.

Short press to access the PUNCH EQ settings. Use the rotary encoder 
to adjust the gain output (0-12). Short press MENU to exit and go back 
up one level.

Punch EQ is an onboard equalizer with up to +18dB @ 45Hz and/or up to 
+12dB boost at 12.5kHz

RENAME – To rename AUX, short press the encoder button to set the first 
letter of the new name. Once active, rotate encoder to adjust letters. Short 
press the encoder button again to set the next letter. Repeat until AUX has 
been renamed. Short press MENU to exit and go back up one level.

ENABLE - Short press the encoder button to access options. Rotate the 
encoder button to select if unit is discoverable. (ENABLE > DISABLE)

To adjust the level of device input gain, scroll through the inputs (FM 
TUNER>AM TUNER>WB TUNER>USB>AUX>BLUETOOTH>PANDORA>S
iriusXM) to the device you want to adjust, short press the encoder button 
to access the gain settings. Rotate the encoder button to set the level of 
gain. (-3dB > -2dB > -1dB > 0dB > +1dB > +2dB > +3dB) 

Short press to access the INTERNAL AMPLIFIER options. Use the rotary 
encoder to select options (ON>OFF). When using an amplifier to power 
your speakers, select OFF. If you are powering your speakers directly 
from the source unit, select the INTERNAL AMPLIFIER to ON.

To display the vehicle voltage, short press the encoder button on the 
VOLTAGE GAUGE option. 

Short press the encoder button to access options (DISCOVERABLE > 
DEVICE).

Rotate the encoder button to select if unit is discoverable for pairing. 
(ENABLE > DISABLE) Once enabled, the source unit is now discoverable 
and ready for pairing to your device. Open the Bluetooth settings on your 
device to find the source unit labeled “Rockford PMX” and select.

Selecting DEVICE by short pressing the encoder button will allow you 
to rename the source unit with up to 16 characters. This gives you 
the ability to have a unique name for easy identification during device 
pairing. Short press the encoder button to select the letter to be changed 
and rotate the knob to change the value. Repeat process until desired 
name is reached.