Fujifilm EX-20 Guia Do Utilizador

37

You can view and store the files you have captured with the camera using
your PC. To download the files for viewing, you must first install the
software that comes with your camera.

Connecting the Camera to the Computer:
1.  When the camera is connected to the computer

2. Plug the rectangular end of the USB cable that is

included with the FUJIFILM DIGITAL CAMERA EX-20
into your PC’s USB port. Please refer to your
computer’s documentation for more information
on the location of the USB port. (fig.5.1)

3. Open the Cable Connection panel on the camera,

by sliding the door in the downward direction, then lift the door.

4. Plug the square end of the USB cable into the USB connector located

inside the Cable Connection panel.

Unplugging the Camera From the Computer
(Windows ME/2000/XP)
1. Click once on the "Unplug or Eject Hardware" icon on the

right hand side of your task bar. (fig.5.2)

2. If the camera is in PC Driver mode, select "Stop Fujifilm

EX-10/EX-20 PC."  
OR
If the camera is in DSC Driver mode, select "Stop Fujifilm EX-10/EX-20
DSC."

3. Click [OK] in the "Safe to Remove Hardware" prompt.
4. Unplug the USB from the camera.

fig.5.1

fig.5.2

Duo LCD Manual-English  13/9/02  4:31 pm  Page 37