Risco Ltd. CAV005 Manual Do Utilizador

WatchIN Installation Manual

 

17

1.  From the installer menu enter the Add/Delete menu: Quick Key [7][1][9][5] for BUS 

Zones detectors. 

2. Use the 

 / 

 or 

 / 

 keys to position the cursor over the BUS 

Zone ID number for which you want to assign (or delete) a detector.  

Make sure that the detector's physical ID number is identical to the ID number you select during programming. 

3.  Place the cursor on the TYPE field and use the 

 / 

 key to select IDT25 for 

the WatchIN DT detector. 

4. Press 

 / 

 to confirm. 

5.  Repeat the process for the other BUS detectors. 

1.  From the main installer menu enter Zones: One by One option (Quick key [2][1])  
2.  Select the zone number that you want to assign the BUS detector. 

If you have defined a BUS Zone Expander, select a zone number from the virtual zones (defined by the BUS 
zone expander). 

3.  Define Partitions, Groups, Zone Type and Zone Sound. 

4.  In the Termination category select [5] BUS Zone followed by 

 / 

.  

The following display appears:  

 

 

5.  Select the BUS zone number to assign to the programmed zone. The type field will be 

updated automatically when selecting the zone. 

6. Press 

 / 

. The loop response category is not applicable to a BUS zone 

and the following display appears:  

 

7. Press 

 / 

, assign label and press

 / 

. 

1.  To access the WatchIN settings option press [2][0][3] from the main installer menu. 

The following display appears: 

 

 

2.  Select the zone that the BUS zone was assigned to and press 

 / 

. You 

can now program the WatchIN parameters as follows: 

[2][0][3][zzz] 
[1] 

Defines the LEDS operation mode 
Off 

[2][0][3][zzz] 
[1][1] 

Disables the LEDS operation