Raytheon Anschuetz GmbH High Seas Products MTX5 Manual Do Utilizador
Chapter 2: Installing the Scanner
25
Re-connect to the plug. When correctly fitted the white wire (co-axial) will
be at the outer edge of the unit.
be at the outer edge of the unit.
Grey
Purple
Blue
Green
Yellow
Orange
Coaxial Screen
(Black)
Coaxial Inner
(White)
Purple
Blue
Green
Yellow
Orange
Coaxial Screen
(Black)
Coaxial Inner
(White)
Signal connector
Power connector
D4576-1
5. Connect the red and black power cores. Connect the red cable leads to the
terminal sockets marked “+”, and the black cable leads to the terminal
socket marked “-”, with one lead in each socket. The terminal clamps are
operated using a screwdriver as shown in the inset diagram.
socket marked “-”, with one lead in each socket. The terminal clamps are
operated using a screwdriver as shown in the inset diagram.
CAUTION:
Do not earth the cable screen to the scanner. The radar system is earthed
via the display unit.
Do not earth the cable screen to the scanner. The radar system is earthed
via the display unit.
6. Using the tie-wrap fitting on the pedestal lid, secure the cable.
7. Close the pedestal lide, ensuring that the cable does not become trapped.
Tighten the four self-retaining bolts.
154_2c2.p65
13/05/99, 13:18
25