VeriFone 1619-20XPL Manual Do Utilizador
CONFIDENTIAL
Version A
Page 28 of 37
MasterCard® PayPass™ Contactless Transit Pilots
Installation Guide
3.4.5
Functional Test
1.
Have the bus apply power to the solution. Ensure that the Secura powers up correctly
and the LEDS light up on the contactless card reader assembly. The Secura display
will display a couple of events, namely:
and the LEDS light up on the contactless card reader assembly. The Secura display
will display a couple of events, namely:
o
Event 20 – power up
o
Event 23 – In Service
2.
A number of self-tests can then be carried out using the keyboard functions of the
Secura. Refer to section 5 for full details of the available functions.
Secura. Refer to section 5 for full details of the available functions.
a)
Select function 37 on the keyboard, press 3, 7 then ENT. This will switch on
the green LEDs
the green LEDs
b)
Select function 38 on the keyboard, press 3, 8 then ENT. This will switch on
the green LEDs
the green LEDs
c)
Select function 26 on the keyboard, press 2, 6 then ENT. This will exercise
the green LEDs, the red LEDS and fire a turnstile release (solenoid) pulse.
the green LEDs, the red LEDS and fire a turnstile release (solenoid) pulse.
d)
If the terminal has not contacted MMS when power was applied, perform a
communications test to ensure that connectivity with MMS can be established
satisfactorily. Do this by selecting function 46.
communications test to ensure that connectivity with MMS can be established
satisfactorily. Do this by selecting function 46.
e)
Test that communications with the Transit Payment Platform Authorisation
Server can be established by performing function 44.
Server can be established by performing function 44.
f)
Test that communications with the Transit Payment Platform Batch Server
can be established by performing function 45.
can be established by performing function 45.
g)
Ensure that the terminal is taken out of diagnostic mode by performing
function 10.
function 10.
h)
Other available test functions can be performed – refer to section 5 for full
details of the available functions.
details of the available functions.
3.4.6
Fit Cover
1.
Once the functional tests have passed successfully, fit the outer cover to the solution
as shown:
as shown:
2.
Sign the bus back over to the transit agency