Vayyar Imaging Ltd. VMAKER Manual Do Utilizador
When you are at the point in your project where you would like to place the board in a case, you will
need to experiment with the powering option and place the jumper accordingly. By default, the board
is configured to provide power using the main USB port.
need to experiment with the powering option and place the jumper accordingly. By default, the board
is configured to provide power using the main USB port.
Mechanical placement
Eventually, as your Walabot board becomes part of your project, you’ll want to secure it in a safe and
convenient place. Several options are possible.
convenient place. Several options are possible.
We supply an optional protective case, which can be used to host the Walabot board. This case
comprises a magnetic mount on its back, which enables it to attach to iron surfaces. We supply a
stick-on metallic ring which can be placed on your cellphone, or your robot, or the wall of your
lab, so that you can attach and detach Walabot easily.
comprises a magnetic mount on its back, which enables it to attach to iron surfaces. We supply a
stick-on metallic ring which can be placed on your cellphone, or your robot, or the wall of your
lab, so that you can attach and detach Walabot easily.
You can fix Walabot to the surface of your project, or to its cover. Make sure that the front
cover is nonmetallic (e.g. plastic) and preferably thin (not exceeding 2 mm).
cover is nonmetallic (e.g. plastic) and preferably thin (not exceeding 2 mm).
You can temporarily use the board as is, but be aware that it can get damaged, and the USB
connectors may degrade due to repeated strain. In the case of temporary use of bare board, be
sure to lay it on a non-conducting surface, to prevent an electric short.
connectors may degrade due to repeated strain. In the case of temporary use of bare board, be
sure to lay it on a non-conducting surface, to prevent an electric short.
Mounting Walabot in the case
(explanation how to lay Walabot board in the case and snap the back part of the case; how to use the
magnetic mount)
magnetic mount)
Mounting Walabot for your project
(explanation how to mount Walabot to back surface (including recommended min gap of 8 mm to
accommodate the jumper); how to attach it to cover (incl. min gap of 5 mm between the PCB and he
cover); including side view drawings for recommended spacing or and front view for 68 mm * 136 mm
screw positions)
accommodate the jumper); how to attach it to cover (incl. min gap of 5 mm between the PCB and he
cover); including side view drawings for recommended spacing or and front view for 68 mm * 136 mm
screw positions)
Connecting your Walabot
The Walabot board needs to connect to a hosting device. In most cases it will be a computer, laptop or
desktop, a tablet or a cellphone. The board connects to the hosting device through a USB cable. Walabot
desktop, a tablet or a cellphone. The board connects to the hosting device through a USB cable. Walabot