Roseman Engineering Ltd. 2288 Manual Do Utilizador
998 Old Eagle School Road, Suite 1215
|
Wayne, Pennsylvania 19087
|
T: 610-225-8350
|
F: 610.971.9447
|
www.assetworks.com
62
15
Appendices
Appendix A: Capturing Vehicle Data
15.1.1
Connect the FJ3 to the J1708 CAB9 Connector
If the vehicle has 9 pin Deutsch connector, perform the following:
1. Run a twin wire cable from the vehicle connector to the FJ3.
2. Connect the J1708 Data link (+) wire from pin F of the Deutsch connector.
3. Connect the J1708 Data link (-) wire from pin G of the Deutsch connector.
2. Connect the J1708 Data link (+) wire from pin F of the Deutsch connector.
3. Connect the J1708 Data link (-) wire from pin G of the Deutsch connector.
Note
Optional Power Supply Connection
It is possible to supply the power to the FJ3 from the J1708CAB9 if pin 2/B has
12-24 volts with the ignition in the off position:
12-24 volts with the ignition in the off position:
- Connect Pin 2/B to BATT (+) on the FJ3.
- Connect Pin 1/A to BATT (-) on the FJ3.