TP-LINK TL-SL3226P Manual Do Utilizador

We propose the IP address of the Switch is 192.168.0.2, you can input 

http://192.168.0.2/ in the IE to connect the Switch. Then press Enter, the 

following screen will exist.

Input the user's name and password (the default user's name and password 

are supervisor. Furthermore, the default user has managing right.) Press OK 

to the page of WEB management.

The default user's name and password are set in factory. You can revise and 

add user's names and passwords in the Security Configuration. You must 

have management right when you revising such configuration. If you reset 

the Switch to factory configuration, all users' names and passwords set 

before will disappear. There is only default user's name and password.

Like TELNET, WEB has two managing rights, Manager's right and user's 

right.

When connecting the Switch to another switch, a bridge or a hub, a normal 

cable is necessary. Please review these products for matching cable pin 

assignment. The following diagram and table show the standard RJ-45 

receptacle/connector and their pin assignments for the switch-to-network 

adapter card connection, and the normal cable for the Switch-to 

switch/hub/bridge connection.

 TL-SL3226P

 24+2G Gigabit Managed Switch User's Guide

 TL-SL3226P

 24+2G Gigabit Managed Switch User's Guide

Figure 5-5

Figure 5-6

87654321

1 2 3 4 5 6 7 8

Figure A-1. The standard RJ-45 receptacle/connector