Daewoo frs20 Manual Do Utilizador
47
NO
DISASSEMBLING PROCEDURE
NO
DISASSEMBLING PROCEDURE
1
3
2
▷ Insert (-) screw driver into bottom hole of
Dispenser Button Guide.
Pull up forward to remove the guide.
(Be careful not to damage guide surface.)
Pull up forward to remove the guide.
(Be careful not to damage guide surface.)
▷ Remove Micro switch.
2) How to Check Micro Switch
CRITERION
▷GOOD :
▷DEFECTIVE :
Change Micro Switch.
PARTS
HOW TO CHECK
SPEC. NAME
: VP333A-OD-8
: VP333A-OD-8
VOLTAGE
:125V,3A
:125V,3A
8-3. Dispenser Micro Switch
1) Disassembling Procedure
▷Check both terminals
(red circle) with a Multi Tester
(Tester Mode : Resistance (Ω).
Tact Switch
(Blue Circle)
Terminals
(Red circle)
Tester Result
(Resistance Mode)
ON (Close)
Connected
Some Value
OFF (Open)
Disconnected
No value (0)
▷Check Micro Switch.
▷Separate wire connectors
from Micro Switch.
4