Roberts Radio ecologic1 Manual Do Utilizador

18

Your radio will normally scan for FM broadcasts which are strong enough 
to give good reception. However, you may wish the Auto-scan function 
to also be able to fi nd weaker signals, possibly from more distant radio 
transmitters. Your radio includes a local / distant option for the Auto-scan 
function.

1. Press 

the 

On/Off button to switch on your radio.

2.  If needed, press the Band button to select the FM band.

3.  Press and hold the Info button until the display shows "Mono override" 

on the lower line. 

4.  Press and release the Tuning up or down buttons until the display 

shows "FM Scan Zone" then press the Select button to enter the 
scan zone selection menu. 

5. Press 

the 

Tuning up or down buttons to switch between Local and 

Distant options on the lower line of the display. The Distant option will 
allow the radio to fi nd weaker signals when scanning.

6. Press 

the 

Select button to confi rm your selection. The radio will then 

revert to the normal information display. The Local or Distant setting is 
stored in the radio and remains in force until changed or until a System 
Reset.

Note: The intial setting (out of the box, or after a System Reset) causes 
the radio to ignore weak (distant) signals.

3

4,5

4,6

1

2