Roberts Radio ecologic1 Manual Do Utilizador

The Lock switch is used to prevent unintentional operation of your radio.

1. Set 

the 

Lock switch located on the side of your radio to the 'Lock' 

position 

. The power and all other buttons will be disabled, 

this will prevent accidental operation when your radio is packed in a 
suitcase or travel bag.

2.  To release the lock, slide the Lock switch down to the 'Unlock'

position 

.

DC 7.5V 800mA

Your radio is supplied with a Mains Adaptor.

1.  Place your radio on a fl at surface. 

2.  Insert the adaptor plug into the DC socket located on the left hand 

side of your radio. 

3.  Plug the adaptor into a standard 13 amp mains socket outlet. Whenever 

the adaptor is used with the radio, it will take power from the mains 
rather than from the batteries.

 

The mains adaptor is used as the means of connecting 

 

the radio to the mains supply. The mains socket used 

 

for the radio must remain accessible during normal use. In order 

 

to disconnect the radio from the mains completely, the mains 

 

adaptor should be removed from the mains socket outlet 

 completely.

 

6