Supermicro SC733TQ-645 Mid Tower Chassis Beige CSE-733TQ-645 Manual Do Utilizador
Códigos do produto
CSE-733TQ-645
S
UPER SC733 Chassis Installation Guide
6
D.
Removing Components from or Installing
Devices into the 5.25" Drive Bays
Devices into the 5.25" Drive Bays
After removing the side cover from the chassis, you can remove or install
devices into the drive bays (refer to Section B for removing the side cover).
P r o c e d u r e
1. Remove the four screws from the 5.25" drive bay that you want to work
with. (There are only 2 screws for the 3.5" floppy drive.)
2. Slide the 5.25" dummy tray out from the front. (You can also install a
3.5" device in the dummy tray located at the bottom of the 5.25" drive bays.)
3. Attach the drive mounting rail to the 5.25" device you wish to install and
secure it with screws.
4. Once the rail is attached to the device, slide the device into the 5.25" bay
and secure the device with screws.
5. Slide the side cover back to its position and secure it with screws.
Secure with screws
Rail