Brodit ProClip 654815 654815 Folheto

1.

2.

4.

3.

Please read all of the instructions and look at the pictures before attaching the ProClip.  
 
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the
gap obliquely above the air vent. Peel off the adhesive tape covers on the ProClip. Press/Hook the angled edge
on the upper part of the ProClip into the gap next to the gap opener. Press downward on top of the ProClip so all
of the the curved angled edge goes all the way into the gap. Pull out the gap opener.  
 
2. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard to widen the
gap obliquely below the air vent. Pull the lower part of the ProClip downward and hook the angled edge into the
gap next to the gap opener. Press upward on the lower part of the ProClip so all of the curved angled edge goes
all the way into the gap. Pull out the gap opener.  
 
3. This ProClip can be placed onto any of the air vents (also onto the one placed on the right side of the steering
wheel).  
 
4. The ProClip is in place.