Fujitsu S26361-F3300-L710 Folheto
For more information, please visit www.amd.com/firepro
1. Three 4K displays at 60Hz requires displays with DisplayPort 1.2 interfaces with support for HBR2 ( for SST ) or HBR2 with MST. Four 4K displays at 30Hz requires displays with at least one
DisplayPort interface. Four 4K displays at 30Hz with HDMI 1.4a interface can also be supported via DisplayPort to HDMI adapters that support HDMI 4K output. Six full-HD displays requires DP 1.2
MST hub or at least two monitors capable of DP 1.2 daisy-chaining. FP-119
2. AMD Eyefinity technology supports up to six DisplayPort™ monitors on an enabled graphics card. Supported display quantity, type, and resolution vary by model and board design; confirm
specifications with manufacturer before purchase. To enable more than two displays, or multiple displays from a single output, additional hardware such as DisplayPort-ready monitors or
DisplayPort 1.2 MST-enabled hubs may be required. A maximum of two active adapters is recommended for consumer systems. See www.amd.com/eyefinityfaq for full details.
3. AMD PowerTune and AMD ZeroCore Power are technologies offered by certain AMD FirePro™ products, which are designed to intelligently manage GPU power consumption in response to certain
GPU load conditions. Not all products feature all technologies – check with your component or system manufacturer for specific model capabilities.
4. Requires ATI FirePro™S400 synchronization module.
5. AMD FirePro W7100 graphics encoding throughput for 1080p video is 315 FPS, approximately 12x faster than real-time, or 24 FPS. System configuration: AMD Phenom II 1055T 2.8 GHz, 8GB RAM,
Win 8.1 64-bit, AMD 14.30 beta. AMD does not provide a license/sublicense to any intellectual property rights relating to any to any standards, including but not limited to any audio and/or video
codec technologies such as AVC/H.264/MPEG-4, AVC, VC-1, MPEG-2, and DivX/xVid.
6. FreeSync is an AMD technology designed to reduce or eliminate screen tears in games and videos by allowing the monitor’s refresh rate to be controlled by and synchronized to the graphics card.
Requires DisplayPort 1.2a compliant monitors that support DisplayPort Adaptive-Sync and an AMD FirePro W5100, W7100, W8100, or W9100 graphics card with forthcoming FreeSync-enabled driver.
Support for use with multiple monitors planned. Confirm supported technologies with system manufacturer before purchase.
7. OpenCL 1.2 conformance expected. AMD plans to release OpenCL 2.0 drivers for enabled AMD FirePro W5100, W7100, W8100, and W9100 graphics cards in Q1 2015; conformance testing is planned at
that time. Previous-generation AMD FirePro products may not support OpenCL 2.0.
©2014 Advanced Micro Devices, Inc. All rights reserved. AMD, the AMD Arrow logo, AMD FirePro, and combinations thereof are trademarks of Advanced Micro Devices, Inc. Microsoft, Windows and DirectX
are registered trademarks of Microsoft Corporation in the United States and/or other jurisdictions. OpenCL and the OpenCL logo are trademarks of Apple Inc. used by permission by Khronos. PCI Express is
a registered trademark of PCI-SIG. Other names are for informational purposes only and may be trademarks of their respective owners. PID 55375A
AMD FirePro
™
W7100 Workstation Graphics
Features
Benefits
AMD Graphics Core Next (GCN) Architecture
Efficiently balances compute tasks with 3D workloads, enabling multitasking designed to optimize utilization and
maximize performance.
maximize performance.
8GB GDDR5 GPU Memory
With a 256-bit memory interface and up to 160 GB/s of memory bandwidth, users can edit 4K video, layer in multiple
effects and color correct, or load sizeable assemblies and data sets and manipulate them in real time.
effects and color correct, or load sizeable assemblies and data sets and manipulate them in real time.
DirectGMA (Direct Graphics Memory Access)
Bypasses any need to traverse the host’s main memory, reducing CPU utilization and avoiding redundant transfers
over PCIe®, resulting in high throughput, low-latency data transfers.
over PCIe®, resulting in high throughput, low-latency data transfers.
Double Rate GeometryBoost
Allows the GPU to process geometry data at a rate of twice per clock cycle. Triangle rates increase twofold relative to a
GPU that does not possess GeometryBoost. The GPU on the W7100 cards features four graphics engines that allow it
to process four primitives per clock cycle.
GPU that does not possess GeometryBoost. The GPU on the W7100 cards features four graphics engines that allow it
to process four primitives per clock cycle.
AMD Eyefinity Multidisplay Technology
Enables highly immersive and powerful multitasking experiences across multiple displays. Each AMD FirePro™ W7100
is capable of driving up to four displays at 4K resolutions each.
is capable of driving up to four displays at 4K resolutions each.
1,2
DisplayPort 1.2a and Adaptive-Sync Support
Simultaneously outputs multiple independent audio streams and display content at resolutions beyond standard HD
(maximum resolution of 4096 x 2160). Adaptive-Sync enables FreeSync technology from AMD that allows GPU control of
display refresh rates for tear-free and jitter-free image quality when rotating models or viewing video content.
(maximum resolution of 4096 x 2160). Adaptive-Sync enables FreeSync technology from AMD that allows GPU control of
display refresh rates for tear-free and jitter-free image quality when rotating models or viewing video content.
5
Ready for 4K
Equipped with four DisplayPort outputs with DisplayPort 1.2a support and six display engines, the
AMD FirePro W7100 can drive up to three 4K displays at 60 Hz or drive up to four 4K displays at 30 Hz.
AMD FirePro W7100 can drive up to three 4K displays at 60 Hz or drive up to four 4K displays at 30 Hz.
1
3.3 TFLOPS of Peak Single Precision
Floating Point Performance
Floating Point Performance
Helps speed up time required to complete single precision floating point operations used within Simulations, Video
Enhancement, Signal Processing, Video Transcoding, and Digital Rendering applications where high performance takes
precedence over extreme accuracy.
Enhancement, Signal Processing, Video Transcoding, and Digital Rendering applications where high performance takes
precedence over extreme accuracy.
OpenCL™ 2.0
7
AMD FirePro W7100 cards are designed to support OpenCL 2.0. Tap into the parallel computing power of its GPU and
get up to 3.3 TFLOPS of peak single precision compute power to accelerate compute-intensive tasks.
get up to 3.3 TFLOPS of peak single precision compute power to accelerate compute-intensive tasks.
AMD PowerTune Technology³
Performs real-time analysis of applications that utilize a GPU. In the event that an application is not making the most
of the power available to the GPU, AMD PowerTune technology can improve that application’s performance by raising
the GPU‘s clock speed by up to 30% automatically.
of the power available to the GPU, AMD PowerTune technology can improve that application’s performance by raising
the GPU‘s clock speed by up to 30% automatically.
AMD ZeroCore Power Technology³
AMD ZeroCore Power technology leverages AMD's leadership in notebook power efficiency to grant our desktop GPUs
the ability to power down when your monitor is off, also known as the "long idle state."
the ability to power down when your monitor is off, also known as the "long idle state."
TM
TM