Beha Amprobe TMD-56 Thermometer USB Data Logger 3730138 Manual Do Utilizador
Códigos do produto
3730138
12
“SAVE” Button (TMD-56 except)
The save function stores the T1, T2 data in a nonvolatile
memory. Press the “SAVE” button to save the current
data, the word SAVE is displayed to indicate the data
has been saved. The built in memory can store up to 128
data. The data can be read using the read function in the
normal mode.
The save function stores the T1, T2 data in a nonvolatile
memory. Press the “SAVE” button to save the current
data, the word SAVE is displayed to indicate the data
has been saved. The built in memory can store up to 128
data. The data can be read using the read function in the
normal mode.
“SAVE” Button (TMD-56)
The save function stores the T1, T2 data in a nonvolatile
memory. Press the “SAVE” button to save the current
data, the word SAVE is displayed to indicate the data
has been saved. The built in memory can store up to 256
data. The data can be read using the read function in the
normal mode.
The save function stores the T1, T2 data in a nonvolatile
memory. Press the “SAVE” button to save the current
data, the word SAVE is displayed to indicate the data
has been saved. The built in memory can store up to 256
data. The data can be read using the read function in the
normal mode.
“LOG” Button (TMD-56 except)
The data log function continuously records the data
according to a specified time interval. The time interval
can be set using the interval setup function [INVT] in
the set up mode. Press the “LOG” button to activate the
log function; the indicators “LOG” and “MEM” will be
displayed on the LCD. There are 16 groups that are used
for storing the log data, and each group uses 64 data
slots. If the current log session exceeds 64 data points,
the log function will automatically use the next group to
store the following data. A maximum of 1024 data points
can be saved in one log session. Press the “LOG” button
again to exit the data log function.
The data log function continuously records the data
according to a specified time interval. The time interval
can be set using the interval setup function [INVT] in
the set up mode. Press the “LOG” button to activate the
log function; the indicators “LOG” and “MEM” will be
displayed on the LCD. There are 16 groups that are used
for storing the log data, and each group uses 64 data
slots. If the current log session exceeds 64 data points,
the log function will automatically use the next group to
store the following data. A maximum of 1024 data points
can be saved in one log session. Press the “LOG” button
again to exit the data log function.
“LOG” Button (TMD-56)
The data log function continuously records the data
according to a specified timeinterval. The time interval
can be set using the interval space setup function [INVT]
in theset up mode. Press the “LOG” button to activate
the log space function; the indicators “LOG” and “MEM”
will be displayed on the LCD. There are 16 groups that are
used for storing the log data. A maximum of 16,000 data
The data log function continuously records the data
according to a specified timeinterval. The time interval
can be set using the interval space setup function [INVT]
in theset up mode. Press the “LOG” button to activate
the log space function; the indicators “LOG” and “MEM”
will be displayed on the LCD. There are 16 groups that are
used for storing the log data. A maximum of 16,000 data