Renkforce Digitale Funk-Wetterstation sw Wireless Weather Station E0303H2TPR Ficha De Dados

•  When more than one outdoor sensor is logged on to the weather station, briefly push

the button „CHANNEL“ (3) to switch between the outdoor sensors and display their

measured values. The respective sensor/channel number is displayed at the lower 

left next to the outdoor temperature.

•  If switching between the outdoor sensors is to take place automatically, push the

button „CHANNEL“ (3) repeatedly until the symbol „

“ appears in the lower left of 

the display.

  The measured values of the outdoor sensors are displayed here in sequence for a few 

seconds (and the associated sensor/channel number).

 These functions of the button „CHANNEL“ are only available when more than

one outdoor sensor is logged in at the weather station.

Displaying Values
The weather station saves the extremes for the indoor/outdoor temperatures, indoor/

outdoor humidity and barometric pressure. Briefly press the button „MEM“ (8) repeatedly

to switch between the following displays:
•  Maximum values
•  Minimum values
•  Current measured values

  The display of the maximum or minimum values will automatically return to the 

display of the current values after a few seconds if no button is pushed.

Deleting/Resetting Values
The weather station automatically resets the values at 0:00 AM every day. Difficult manual 

resetting is therefore not required. 

The weather station shows a graphic progress display of the barometric pressure of the 

past 12 hours in the upper right of the display. Here, you can observe how the barometric

pressure has changed in the 12 hours.