TP-LINK CPE510 Manual Do Utilizador
Chapter 3 Quick Setup Guide
Chapter 3
Quick Setup Guide
Quick Setup wizard allows you to quickly configure your device step by step. Choose the suitable
operation mode according to your network environment and follow the step-by-step instructions.
operation mode according to your network environment and follow the step-by-step instructions.
Access Point
If Access Point is selected, click Next and take the following steps:
1.
The LAN Settings page will appear as shown below. The default IP Address is 192.168.0.254 and the
default Subnet Mask is 255.255.255.0. You can change the IP Address and Subnet Mask on this page
when there is an IP conflict with other devices. We recommend you keep it by default. Click Next.
default Subnet Mask is 255.255.255.0. You can change the IP Address and Subnet Mask on this page
when there is an IP conflict with other devices. We recommend you keep it by default. Click Next.
- 10 -